Hazardous-Area Approved DP1009
Intrinsically Safe FFv™ Proximity Probe, 5 mm Probe Tip Diameter, with 1/4-28, 3/8-24, M8x1, or M10x1 Case Thread
Measure shaft vibration and displacement on machinery with fluid film bearings
Durable PPS over-molded probe tips withstand harsh conditions when monitoring critical machinery such as turbines and compressors
- 5 mm probe tip diameter with 1/4-28, 3/8-24, M8x1 or M10x1 threaded body
- Probe tip and body sealed to prevent leaking through cable
- Complete hardware system is compatible with all standard condition monitoring software
Lengths AA, BB, and CC are configurable
|
Temperature Range
|
-49 to 340 deg;F (-45 to 171 °C) |
|
Sensitivity
|
-200 mV/mil (-7.87 V/mm) (1 mil = 0.001 in.) |
|
Material
|
FEP Cable Jacket with 316L Stainless Steel Probe Body |
|
Case Thread
|
1/4-28 or M8x1 (Standard Mount), 3/8-24 or M10x1 (Reverse Mount) |
|
Wrench Flats
|
7/32 in. or 7 mm (Standard Mount), 7/16 in. or 11 mm (Reverse Mount) |
|
Rating
|
IP68 |
|
Connector
|
SecureLock |
|
Connector Pull Strength
|
Up to 30 lbs. |
|
Bending Radius
|
1.16 in. (2.95 cm) |
US & Canada:
Class I Division 1 Groups A, B, C, D
Class II Division 1 Groups E, F, G
Class III
Class I Zone 0 AEx ia IIC
Class I Division 2 Groups A, B, C, D
Class II Division 2 Groups E, F, G
Ex ia IIC Ga
ATEX:
SIRA 16ATEX2084X
Ex ia IIC
International (IECEx):
IECEx CSA 16.0017X
Ex ia IIC
Temperature Codes:
T4 = -45°C to 100°C
T5 = -35°C to 85°C
