AC936 Series

Nonincendive, CSA North America Class 1, Division 2 and ATEX Zone 2 Approved Accelerometer, Side Exit 2 Pin Connector, 100 mV/g, ±10%
AC936-1A
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
AC936-1A dimension drawing
Stock Product
AC936-2C
CB190 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
AC936-2C dimension drawing
Built To Order
AC936-3C
CB296 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
AC936-3C dimension drawing
Built To Order
Specifications Standard Metric
Part Number AC936 M/AC936
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-516,000 CPM 0,5-8600 Hz
Frequency Response (±10%) 60-360,000 CPM 1,0-6000 Hz
Dynamic Range ± 80 g, peak
Electrical
Settling Time <3 Seconds
Voltage Source (IEPE) 18-28 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 30 µg/√Hz
Spectral Noise @ 100 Hz 19 µg/√Hz
Spectral Noise @ 1000 Hz 15 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Operating Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
SIL Rating SIL 2
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.3 oz 150 grams
Case Material 316L Stainless Steel
Mounting Thread 1/4-28
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,260,000 CPM 21000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart