LP202-M12E Series

Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Top Exit 4 Pin M12 Connector
4 Pin Connector
Connector Pin Polarity
1 (+) Signal/Power
2 (-) Common
3 Not Used
4 Not Used
A drawing showing the dimensions and pin configuration of a CTC LP202-M12E industrial accelerometer.
Built To Order
Specifications Standard Metric
Part Number LP202-M12E M/ or M8/LP202-M12E
Tolerance: 4 mA (± 10%)
Tolerance: 20 mA (± 10%)
Settling Time <30 Seconds
Voltage Source (IEPE) 15-30 VDC
Case Isolation >108 ohm
Operating Temperature Range -4 to 212 °F -20 to 100 °C
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Specifications Standard Metric
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 2.9 oz 82 grams
Case Material 316L Stainless Steel
Mounting Thread 1/4-28 Blind Tapped Hole
Connector (Non-Integral) 4 Pin M12
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Stud M6x1 or M8x1.25 Adapter Stud
Calibration Certificate Current Output @ 100 Hz

Ordering Information

A chart showing configuration options to create a complete part number for ordering a CTC LP202-M12E 4-20 mA loop power sensor.