LP262 Series

Dual Output Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity with °C Temperature Output, Top Exit 3 Pin Connector
LP262-XXX-1E
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
LP262-$$$-1E dimension drawing
Built To Order
LP262-XXX-2E
CB105 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
LP262-$$$-2E dimension drawing
Built To Order
LP262-XXX-3E
CB218 Amored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
LP262-$$$-3E dimension drawing
Built To Order
Specifications Standard Metric
Part Number LP262 M/ or M8/LP262
Temperature Output 10 mV/°C
within the range -40 to 85 °C
Tolerance: 4 mA (± 10%)
Tolerance: 20 mA (± 10%)
Tolerance: Temperature (± 5°C)
Electrical
Settling Time <30 Seconds
Voltage Source (IEPE) 15-30 VDC
Case Isolation >108 ohm
Environmental
Operating Temperature Range -4 to 212 °F -20 to 100 °C
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
Specifications Standard Metric
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 3.0 oz 86 grams
Case Material 316L Stainless Steel
Mounting Thread 1/4-28 Blind Tapped Hole
Connector (Non-Integral) 3 Pin MIL-C-5015
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Stud M6x1 or M8x1.25 Adapter Stud
Calibration Certificate Current Output @ 100 Hz

Ordering Information

LP262 Ordering Information