LP284 Series

Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Side Exit 2 Pin Connector, M8x1.25 Captive Bolt
LP284-XXX-1E
2 Pin Connector
Connector Pin Polarity
A (+) Loop Power mA Output
B (-) Common
A drawing showing the dimensions and pin configuration of a CTC LP284 4-20 mA loop power sensor with standard connector.
Built To Order
LP284-XXX-2E
CB103 Integral Cable
Conductor Polarity
Red (+) Loop Power mA Output
Black (-) Common
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC LP284 4-20 mA loop power sensor with integral cable.
Built To Order
LP284-XXX-3E
CB206 Armored Integral Cable
Conductor Polarity
Red (+) Loop Power mA Output
Black (-) Common
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC LP284 4-20 mA loop power sensor with armored integral cable.
Built To Order
Specifications Standard Metric
Part Number LP284
Tolerance: 4 mA (± 10%)
Tolerance: 20 mA (± 10%)
Electrical
Settling Time <30 Seconds
Voltage Source 15-30 VDC
Case Isolation >108 ohm
Environmental
Operating Temperature Range -4 to 212°F -20 to 100°C
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
Specifications Standard Metric
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 6.0 oz 170 grams
Case Material 316L Stainless Steel
Mounting Thread M8x1.25 Captive Bolt
Connector (Non-Integral) 2 Pin MIL-C-5015
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied M8x1.25 Captive Bolt
Calibration Certificate Current Output @ 100 Hz

Ordering Information

A chart showing configuration options to create a complete part number for ordering a CTC LP284 4-20 mA loop power sensor.