LP802 Series
Intrinsically Safe Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector
Product Features
4-20 mA Output Proportional to Vibration in Velocity
CSA and ATEX Approvals
- Requires Energy Limiting Barriers such as IS111
- Transmit Signals Over Long Distances with No Signal Loss
- Outputs to PLC, DCS, SCADA
LP802-XXX-1B
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Loop Power mA Output |
| B | (-) Common |
Built To Order
LP802-XXX-2C
Integral Cable
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
LP802-XXX-3C
Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.7 oz | 105 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting Thread | 1/4-28 Blind Tapped Hole | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware Supplied | 1/4-28 Stud | M6x1 or M8x1.25 Adapter Stud | |
| Calibration Certificate | Current Output @ 100 Hz |
Ordering Information
