TA284 Series

Dual Output Sensor, Temperature & Acceleration, M8x1.25 Captive Bolt, Side Exit 3 Pin Connector, 100 mV/g, 10 mV/°C, ±10%
TA284-1A
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
A drawing showing the dimensions and pin configuration of a CTC TA284 industrial accelerometer.
Stock Product
TA284-2A
CB105 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC TA284 industrial accelerometer.
Built To Order
TA284-3A
CB218 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC TA284 industrial accelerometer.
Built To Order
Specifications Standard Metric
Part Number TA284
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-900,000 CPM 0,5-15000 Hz
Frequency Response (±10%) 120-600,000 CPM 2,0-10000 Hz
Dynamic Range ± 50 g, peak
*Vsource ≥ 22V, 12Vbias
Temperature Measurement Range -40 to 250°F -40 to 121°C
Temperature Output 10 mV/°C
Temperature Sensor 750 mV = 25 °C (±1)
Electrical
Settling Time <2.5 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 14 µg/√Hz
Spectral Noise @ 100 Hz 2.3 µg/√Hz
Spectral Noise @ 1000 Hz 2 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Operating Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing IP68
Submersible Depth 200 ft. 60 m
SIL Rating SIL 2
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 6.3 oz 180 grams
Case Material 316L Stainless Steel
Connector (Non-Integral) 3 Pin MIL-C-5015
Resonant Frequency 1,380,000 CPM 23000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied M8x1.25 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

A line graph showing the frequency resopnse of a CTC TA284 condition monitoring sensor.