TA916 Series

Nonincendive, Intrinsically Safe, CSA North America Class 1, Division 1 and IECEx/ATEX Zone 0,1 Approved Dual Output Accelerometer, Acceleration and Temperature, Side Exit 3 Pin Connector, 100 mV/g, 10 mV/°C, ±10%
TA916-1A
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
A drawing showing the dimensions and pin configuration of a CTC TA916 industrial accelerometer.
Stock Product
TA916-2C
CB191 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC TA916 industrial accelerometer with integral cable.
Built To Order
TA916-3C
CB218 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC TA916 industrial accelerometer with armored integral cable.
Built To Order
Specifications Standard Metric
Part Number TA916 M/TA916
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-516,000 CPM 0,5-8600 Hz
Dynamic Range ± 80 g, peak
Temperature Measurement Range 36.5 to 212 °F 2.5 to 100 °C
Temperature Output 10 mV/°C
Electrical
Settling Time <3 Seconds
Voltage Source 18-28 VDC
Spectral Noise @ 10 Hz 30 µg/√Hz
Spectral Noise @ 100 Hz 19 µg/√Hz
Spectral Noise @ 1000 Hz 15 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Operating Temperature Range -40 to 250 °F -40 to 121 °C
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.3 oz 151 grams
Case Material 316L Stainless Steel
Mounting Thread 1/4-28
Connector (Non-Integral) 3 Pin MIL-C-5015
Resonant Frequency 1,260,000 CPM 21000 Hz
Mounting Torque 2 to 5 ft. lbs 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

A line graph showing the frequency resopnse of a CTC TA916 condition monitoring sensor.