TXFA333-TA Series

Low Cost, Dual Output Triaxial Sensor, Temperature & Acceleration, Side Exit 6 Pin Connector, 500 mV/g, 10 mV/°C, ±15%
TXFA333-TA
Connector Pin Polarity
1 (Axis Y) (+) Signal/Power
2 (Axis X) (+) Signal/Power
3 (Axis Z) (+) Signal/Power
4 (-) Common/Ground
5 (+) Temperature
6 Not Used
A drawing showing the dimensions and pin configuration of a CTC TXFA333-TA industrial accelerometer.
Stock Product
TXFA433-TA
Connector Pin Polarity
1 Red (Axis Y) (+) Signal/Power
2 Green (Axis X) (+) Signal/Power
3 White (Axis Z) (+) Signal/Power
4 Black (-) Common/Grid
5 Blue (+) Temperature
6 Not Used
A drawing showing the dimensions and pin configuration of a CTC TXFA333-TA industrial accelerometer.
Built To Order
TXFA533-TA
Connector Pin Polarity
1 Red (Axis Y) (+) Signal/Power
2 Green (Axis X) (+) Signal/Power
3 White (Axis Z) (+) Signal/Power
4 Black (-) Common/Grid
5 Blue (+) Temperature
6 Not Used
A drawing showing the dimensions and pin configuration of a CTC TXFA333-TA industrial accelerometer.
Built To Order
Specifications Standard Metric
Part Number TXFA333-TA M/TXFA333-TA
Sensitivity (±15%) 500 mV/g
Frequency Response (±3dB) 6-420,000 CPM 0,1-7,000 Hz
Frequency Response (±10%) 18-180,000 CPM 0,3-3000 Hz
Frequency Response (±5%) 18-180,000 CPM 0,3-3000 Hz
Dynamic Range ± 10 g, peak
*Vsource ≥ 22V, 12Vbias
Temperature Measurement Range -40 to 250°F -40 to 121°C
Temperature Output 10 mV/°C
Temperature Sensor 750 mV = 25 °C (±1)
Electrical
Settling Time <2 Seconds
Voltage Source (IEPE) 18-30 VDC
Spectral Noise @ 10 Hz 1.7 µg/√Hz
Spectral Noise @ 100 Hz 0.2 µg/√Hz
Spectral Noise @ 1000 Hz 0.12 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Operating Temperature Range -58 to 250°F -50 to 121°C
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
SIL Rating SIL 2
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 13.4 oz 380 grams
Case Material 316L Stainless Steel
Connector (Non-Integral) 6 Pin
Resonant Frequency 600,000 CPM 10 kHz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

A line graph showing the frequency resopnse of a CTC TXFA333-TA condition monitoring sensor.