VE135 Series

Piezo Velocity Sensor, Top Exit 2 Pin Connector, 500 mV/in/sec, ±10%
VE135-1A
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
A drawing showing the dimensions and pin configuration of a CTC VE135 industrial accelerometer.
Stock Product
VE135-2C
Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC VE135 industrial accelerometer with integral cable.
Built To Order
VE135-3C
Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC VE135 industrial accelerometer with armored integral cable.
Built To Order
VE135-6C
Heavy Duty Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
A drawing showing the dimensions and pin configuration of a CTC VE135 industrial accelerometer with heavy duty armored integral cable.
Built To Order
Specifications Standard Metric
Part Number VE135 M/ or M8/VE135
Sensitivity (±10%) 500 mV/in/sec
Frequency Response (±3dB) 60-600,000 CPM 1,0-10000 Hz
Frequency Response (±10%) 120-300,000 CPM 2,0-5000 Hz
Dynamic Range ± 10 in/sec. pk
*Vsource ≥ 22V, 12Vbias
Electrical
Settling Time <4 Seconds
Voltage Source 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 200 µ IPS/√Hz
Spectral Noise @ 100 Hz 6 µ IPS/√Hz
Spectral Noise @ 1000 Hz 0.7 µ IPS/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Operating Temperature Range -58 to 250 °F -50 to 121 °C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 3.2 oz 90 grams
Case Material 316L Stainless Steel
Mounting Thread 1/4-28 Blind Tapped Hole
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,320,000 CPM 22000 Hz
Mounting Torque 2 to 5 ft. lbs 2,7 to 6,8 Nm
Mounting Hardware Supplied 1/4-28 Stud M6x1 or M8x1.25 Adapter Stud
Calibration Certificate CA10

Typical Frequency Response

A line graph showing the frequency resopnse of a CTC VE135 condition monitoring sensor.