Mounting Studs and Adapters

MOUNTING STUDS AND ADAPTERS

All CTC condition monitoring sensors come supplied with a mounting stud or bolt included upon purchase. Top exit sensor cases have a ¼-28 tapped hole in the base of the sensor. Backup studs and adapter studs for various thread types can be purchased below.

MH108-1B

1/4-28 to 1/4-28 Mounting Stud, Stainless Steel, 0.37 in. (9.398 mm) Length

MH108-3B

1/4-28 to 10-32 Adapter Stud, Stainless Steel, 0.32 in. (8 mm) Length

MH108-4B

1/4-28 Mounting Screw, Stainless Steel, 0.5 in. (13 mm) Length

MH108-5B

1/4-28 to M6x1 Adapter Stud, Stainless Steel, 0.44 in. (11 mm) Length

MH108-6B

1/4-28 to M8x1.25 Adapter Stud, Stainless Steel, 0.5 in. (13 mm) Length

MH108-28B

1/4-28 UNF male to 3/8-24 UNF Male Adapter Stud, Stainless Steel, 0.57 in. (14.4 mm) Length

MH108-7B

1/4-28 to M10x1.50 Adapter Stud, Stainless Steel, 0.63 in. (16 mm) Length

MH108-30B

1/4-28 to M5 Adapter Stud, Stainless Steel, 0.36 in. (9 mm) Length

MH108-31B

10-32 to M6x1 Adapter Stud, Stainless Steel, 0.37 in. (9 mm) Length

MH108-32B

10-32 to M5 Adapter Stud, Stainless Steel, 0.31 in. (8 mm) Length

MH108-33B

10-32 Thread Cup-Point Set Screw, 18-8 Stainless Steel, 0.38 in. (10 mm) Length

MH108-42B

Replacement 1/4-28 Mounting Stud, 316L Stainless Steel, 0.39 in. (9.9 mm) Length, 0.5 in. (12.7 mm) Diameter, for use with CTC's MEB360 and MCB360 Series Low Profile Accelerometers with Integrated Rotating Locking Nut

MH108-43B

Replacement M6x1 Mounting Stud, 316L Stainless Steel, 0.39 in. (9.9 mm) Length, 0.5 in. (12.7 mm) Diameter, for use with CTC's MEB360 and MCB360 Series Low Profile Accelerometers with Integrated Rotating Rotating Locking Nut