Products CTC Line Mounting Hardware Accelerometer Quick Disconnects

ACCELEROMETER QUICK DISCONNECTS

CTC's quick disconnects are ideally suited for triaxial sensor use. The permanently mounted stud creates a consistent mounting location for portable routes. The receptacle features a triaxial locating notch and ¼ turn engagement onto the stud, ensuring the sensor is oriented in the same position when connected to the stud for every reading.

Ready to get started with Quick Disconnect solutions? View our Quick Disconnect Installation Guide to learn more about how to use Quick Disconnect Studs and Receptacles

MH106-1A

Quick Disconnect Receptacle, 10-32 Tapped Sensor Mounting Hole

MH107-1A

Quick Disconnect Receptacle, 1/4-28 Tapped Sensor Mounting Hole

MH107-1B

Quick Disconnect Stud

MH107-2B

Quick Disconnect Stud with Through-Hole Mounting, 1/4-28 Socket Head Cap Screw Included

MH107-3A

Quick Disconnect Receptacle with 1/4-28 Adjustable Orientation Integral Stud Mounting Bolt, Requires 3/16 in. Allen Wrench (Not Included)

MH107-3B

Quick Disconnect Stud with Through-Hole Mounting, M6x1 Socket Head Cap Screw Included

MH107-5A

Quick Disconnect Receptacle with M6 Adjustable Orientation Integral Stud Mounting Bolt, Requires M5 Hex Key (Not Supplied)

CP101 Series

Protective Yellow Plastic Cap Cover for CTC Quick Disconnect Studs, 0.625 in. Diameter, 0.53 in. Tall, in Quantities of 10, 50, and 100 Pieces