FFV PROXIMITY PROBE SETS

CTC’s PRO line of FFV Proximity Probe Systems offer a monitoring solution for machinery with tight installation clearances. FFV (Focused Face View) Probe Systems have a smaller eddy current field than standard proximity probe systems, this allows for better performance for applications where the rotor or target area is smaller than recommended. An FFV Proximity Probe System is recommended whenever the shaft being monitored is under 2 inches (50 mm) in diameter.

Whether you're in the power generation, oil and gas, or industrial manufacturing, our proximity probe sets are sure to meet your needs and compatible with all standard condition monitoring software, including Alta Solutions, Bently Nevada, TWave, and more.

Our PRO Line proximity probes sets are made with the most durable material possible to protect our advanced technology, ensuring a long lifespan even in the harshest environments.

NEW - Custom Calibration Materials
Looking for a unique custom calibration material? We can create a custom target for you.

Requirements:
» $2,500 NRE fee (discount exempt)
» Customer must supply the material for CTC to machine (CTC will provide required dimensions once the project is initiated)
» Initial order requirement of 10 proximity probe drivers calibrated to that target, with no MOQ on subsequent orders

Contact [email protected] to get started with your custom calibration material.

With our easy-to-use website, you can customize your probe set to your application's exact needs.

DP1009

FFV Proximity Probe, 5.4 mm Probe Tip Diameter, with 1/4-28, 3/8-24, M8x1, or M10x1 Case Thread

DP1009 with Armor

Armored FFV Proximity Probe, 5.4 mm Probe Tip Diameter, with 1/4-28 or M8x1 Case Thread

DD1009 4-20 mA Output

Eddy Current Driver Compatible with FFV Proximity Probe Systems, 4-20 mA Output

DD100980 Voltage Output

Eddy Current Driver Compatible with FFV Proximity Probe Systems, Voltage Output

DC100930

Proximity Probe Extension Cable for PRO FFV Probes, FEP Jacket

DC100930 with Armor

Proximity Probe Extension Cable for PRO FFV Probes, with Armor Jacket

HOW TO CHOOSE YOUR PROXIMITY PROBE DRIVER:

Please reference the diagrams below to select the appropriate proximity probe driver for you application

Voltage Driver

The voltage driver has a dynamic voltage output that is compatible with industry-standard continuous vibration monitoring systems and is the format specified in API Standard 670. The dynamic voltage output is proportional to the DC gap between the target material and probe tip.

View DD100980

4-20mA Drivers:

4-20mA Drivers Proportional to DC Gap:

Probe showing proportional output for the 4-20mA signals. With shaft surface at 50 mils, 4 - 20 output is 12mA.If the gap increases to 70 mils, 4 - 20 output will be 16mA.

View DD100970

Radial Applications Drivers:

In radial applications, the probe drivers select the average shaft surface distance and the 4-20 is proportional to the overall peak to peak vibration in mils around the average surface of the shaft.

View DD100990

Axial Application Drivers:

In the thrust position the probes auto range to the face of the shaft or thrust collar and the 4-20 is proportional to the positive or negative vibration away or toward the probe as shown.

View DD100991