SBX52 Series
Fiberglass Enclosure
Stainless Steel Enclosure
SINGLE AXIS VIBRATION SWITCH BOX WITH CONTINUOUS OUTPUT BNCS, FIBERGLASS ENCLOSURE, NEMA 4X (IP66) RATED, SENSOR INPUT OPTIONS: 6 TO 12 SINGLE OUTPUT SENSOR INPUTS
- Provides a switched output to a data collector, or continuous outputs to a signal recorder or multi-channel analyzer
- Internally earth grounded for noise reduction
- -58 to 180 °F (-50 to 82 °C) Temperature Range
COMPLIANCE INFO
California Proposition 65 Statement
China RoHS Compliance Statement
EU Battery Compliance Statement
EU Declaration of Conformity
EU POPs Declaration of Compliance
EU Waste Compliance Statement
PFA Usage Statement
REACH Compliance Statement
RMI Conflict Minerals Compliance Report
RMI Extended Minerals Compliance Report
RoHS Compliance Statement
TSCA Compliance Statement
SB152: Fiberglass Switch Box with Continuous Output BNC's
The SB152 fiberglass switch box with continuous output BNCs is used to convert the two-conductor wiring of up to 12 remotely installed single-axis accelerometers or piezo velocity sensors to BNC connectors for simultaneous data collection via a portable data collection unit. The SB152 also allows for single sensor data collection via a switched BNC and two-pin MIL spec connector. Input wiring from each sensor is connected via quick-connect terminal blocks. Each terminal block includes input for positive, negative and shield. The shield drain wire is earth-grounded via a ground stud that is mounted to the side of the fiberglass enclosure.
Rated for NEMA 4X (IP66), the SB152 Series can withstand harsh environments including temperatures ranging from -40 to 212 °F (-40 to 100 °C). The box is also resistant to hose directed fluid and corrosion. A snap latch is installed on the door allowing the box to be sealed from the elements when not in use.
