SSB1002 Extended Capacity Fiberglass Modular Switch Box

The SSB1002 Series fiberglass modular switch box is used to convert the two-conductor input wiring of up to 48 remotely installed single-axis accelerometers or piezo velocity sensors to a switched BNC and a switched two-pin MIL spec connector for data collection. Input wiring from each sensor is connected to the outputs via spring cage or screw terminal blocks on the bottom of the module. Each terminal block includes inputs for signal/power, common and shield. The shield drain wire is earth grounded via a ground stud that is mounted to the side of the fiberglass enclosure. While the channel count of standard SB or JB switch boxes can not be modified after purchase, SSB1002 boxes offer the flexibility to add channels at a later date (if less than 48 inputs are required for initial install). Simply purchase additional terminal blocks and plug them into the bottom of the module to add channels. The SSB1002 series may also be equipped with online expansion terminal strips, which can be selected upon ordering.

SSB3000 diagram

Rated for NEMA 4X (IP66), the SSB1002 Series can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose directed fluid and corrosion. Two snap latches are installed on the door allowing the box to be sealed from the elements when not in use.

CTC product comparison chart
CTC corporate logo with a brushed steel texture
7939 Rae Boulevard
Victor, NY 14564 USA
+01 585.924.5900
Send POs To:
[email protected]
Contact a Sales Rep:
[email protected]